Products

These plastic equipments, which provide the required space for horizontal iron equipment in the foundations where they are used, can be easily used in heavy iron equipments. It increases the strength of the iron with its use.

It is specially produced for steel, plywood and wooden molds. It is applied directly to the molds by brush, roller or spraying method. It ensures that the mold is easily separated from the concrete and a clean, smooth surface is obtained. For your health,...

It is a mechanical mechanism used to adjust and tighten the iron bar installed inside the formwork while assembling KBS Curtain and column formworks. It performs the adjustment process in a very short time thanks to its arm.

They are auxiliary elements used to keep the curtain and column forms at the same distance. They are attached to both ends of the construction irons that are passed between the forms and prevent the form from opening. The threaded part that holds the...

FUGA LATH It is used in cases where a chamfer is required in the corner formation of two panels. It also ensures the sealing of the mold. It is made of hard PVC . It can be used repeatedly. Its standard length is 3...

It is used in cases where a chamfer is required in the corner formation of two panels. It also ensures the sealing of the mold. It is made of hard PVC . It can be used repeatedly. Its standard length is 3 meters.

It is used in cases where a chamfer is required in the corner formation of two panels. It also ensures the sealing of the mold. It is made of hard PVC . It can be used repeatedly. Its standard length is 3 meters.

It is manufactured for protection and security purposes. It is attached to tie-rod shafts or construction irons used in construction. It is available in red and orange colors.

In the pile applications made to strengthen the ground , it provides the concrete distance between the soil and the reinforcement . In this way, the reinforcement is protected from the negative factors that may come from the soil.

It is a cap that prevents the concrete grout from leaking into the sheathing pipe of the stud used to keep the distance between reinforced concrete curtain-column and beam molds constant. It can be closed with its special plug at the end of the...

These are pipes used to protect the Tie-Rot shaft during the casting of curtain concrete in steel and wooden molds. They ensure that the Tie-Rot shaft can be used repeatedly. They are manufactured in desired diameters and lengths.

It is a type of spacer that provides great convenience in large area flooring and wire mesh applications. It easily grasps the wire mesh thanks to the two iron grip protrusions on the upper part of the spacer. It is laid on the surface...

It is a type of spacer used in flooring and precast applications to provide height to the iron equipment on the horizontal plane of beams and floors.

These plastic equipments, which provide the required space for horizontal iron equipment in the foundations where they are used, can be easily used in heavy iron equipments. It increases the strength of the iron with its use.

This type of spacers used in curtain column formworks are mounted on stirrups and provide the desired distance between the formwork and reinforcement, allowing the highest efficiency to be achieved. They are manufactured in different heights to suit various iron diameters. Grip feet can...