Products

These plastic equipments, which provide the required space for horizontal iron equipment in the foundations where they are used, can be easily used in heavy iron equipments. It increases the strength of the iron with its use.

Plastic elements that ensure that the anchor pipes remain properly in the anchor holes.

It is a type of footed spacer used in flooring and curtains. It can also be used in heavy iron reinforcement. Thanks to the foot protrusions at the bottom of the spacer, its resistance to carrying load is higher than its counterparts.

It is used to close the tie-rod holes in plywood. Thanks to its head, it is easier to assemble or disassemble.

KN2 FLEX eldiven, dayanıklı malzemelerden üretilmiş olup aşınmaya, kesilmeye ve delinmeye karşı koruma sağlar. Bu özellikleri sayesinde, inşaat sektöründe yapı malzemeleri taşınırken, tarım alanında bitki işleri yaparken, üretim ve imalat sektöründe montaj işlemlerinde, otomotiv sektöründe araç bakımı ve tamiri sırasında güvenle tercih edilebilir.  KN2 FLEX...

Steel triangle, chamfer and joint lath are types of laths made of steel. They are not subject to oxidation and can be used repeatedly without wearing out. They constitute an economical solution in the long term.

It is a type of spacer that provides great convenience in large area flooring and wire mesh applications. It easily grasps the wire mesh thanks to the two iron grip protrusions on the upper part of the spacer. It is laid on the surface...

In the pile applications made to strengthen the ground , it provides the concrete distance between the soil and the reinforcement . In this way, the reinforcement is protected from the negative factors that may come from the soil.

FUGA LATH It is used in cases where a chamfer is required in the corner formation of two panels. It also ensures the sealing of the mold. It is made of hard PVC . It can be used repeatedly. Its standard length is 3...

This type of spacers used in curtain column formworks are mounted on stirrups and provide the desired distance between the formwork and reinforcement, allowing the highest efficiency to be achieved. They are manufactured in different heights to suit various iron diameters. Grip feet can...

It is specially produced for steel, plywood and wooden molds. It is applied directly to the molds by brush, roller or spraying method. It ensures that the mold is easily separated from the concrete and a clean, smooth surface is obtained. For your health,...

It is specially designed for concrete pole manufacturing. Since it is completely closed, the problem of the pole dislodging due to vibrations on the vibration table is eliminated. It is produced in two different hole diameters.

It is used to seal the anchor holes in concrete. It is made of soft PVC.

It is a mechanical mechanism used to adjust and tighten the iron bar installed inside the formwork while assembling KBS Curtain and column formworks. It performs the adjustment process in a very short time thanks to its arm.

They are auxiliary elements used to keep the curtain and column forms at the same distance. They are attached to both ends of the construction irons that are passed between the forms and prevent the form from opening. The threaded part that holds the...

Auxiliary element made of ductile iron and forged steel used to connect steel molds to each other.

It is used to close the dowel holes opened on polywoods. It also has the feature of closing the holes of pipe heads.

It is used in cases where a chamfer is required in the corner formation of two panels. It also ensures the sealing of the mold. It is made of hard PVC . It can be used repeatedly. Its standard length is 3 meters.

It is used in cases where a chamfer is required in the corner formation of two panels. It also ensures the sealing of the mold. It is made of hard PVC . It can be used repeatedly. Its standard length is 3 meters.

It is a type of spacer used in flooring and precast applications to provide height to the iron equipment on the horizontal plane of beams and floors.

Pamuk astar üzerine nitril kaplı iş eldiveni.Örgü bilekliği ve özel kalıbı sayesinde eli daha iyi kavrar ve konforlu kullanım sağlar.

These plastic equipments, which provide the required space for horizontal iron equipment in the foundations where they are used, can be easily used in heavy iron equipments. It increases the strength of the iron with its use.

This type of spacers used in curtain column formworks are mounted on stirrups and provide the desired distance between the formwork and reinforcement, allowing the highest efficiency to be achieved. They are manufactured in different heights to suit various iron diameters. Grip feet can...

It is applied horizontally and vertically. It provides convenience in serial laying. The desired length can be obtained by attaching to each other. In vertical application, it is prevented from falling by attaching the protrusion on it to the iron.

This type of spacer, which provides great convenience in large area flooring and when using plated mesh steel, easily grasps the iron with its hook on the upper part. It is laid on the iron at appropriate intervals. It can also be used horizontally...

It is a type of spacer used in flooring and precast applications to provide height to the iron equipment in the horizontal plane of beams and floors.

Detachable conical anchor (carrot anchor) is generally used in single-sided wall formworks, climbing formworks and tunnel formworks. AREAS OF USE This system is widely preferred in dam and hydroelectric power plant projects, viaduct and bridge constructions and retaining walls of multi-storey buildings. The removable...

It is used to balance the curtain element remaining in the intermediate distance when pouring concrete in water tanks, swimming pools and related to water. It has two types: flanged and borne. After the Tie-Rot elements are removed, the gaps of the water retainers...

T-profile is made of high quality rigid PVC material, especially used in flooring, which prevents concrete leakage by closing the gaps between the panels. This profile also increases labor efficiency by facilitating formwork removal. It offers a sustainable solution in construction projects with its...

It is a cap that prevents the concrete grout from leaking into the sheathing pipe of the stud used to keep the distance between reinforced concrete curtain-column and beam molds constant. It can be closed with its special plug at the end of the...

These are pipes used to protect the Tie-Rot shaft during the casting of curtain concrete in steel and wooden molds. They ensure that the Tie-Rot shaft can be used repeatedly. They are manufactured in desired diameters and lengths.

It is manufactured for protection and security purposes. It is attached to tie-rod shafts or construction irons used in construction. It is available in red and orange colors.

In curtain concrete casting in steel and wooden molds It is used to preserve the used tie-rod shafts. It is manufactured in the desired size. Thanks to its conical shape, it can be can be removed and used repeatedly.

It is a mold auxiliary material used to keep concrete molds at equal distances during application. It is produced at the desired distance.

4mm. Made of sheet metal. Its body is given domes to increase its strength. Tie-Rot nut helps to apply more pressure to the mold and prevent damage while tightening and removing the mold.

It is used by attaching to both ends of the tie-rod shaft. Since it is made of spherical cast iron, it is very durable and long-lasting. The wide flange diameter does not wear out the mold.

M12-3 trapezoidal thread is drawn on External Drawing machines. Right-Left hooks and specially manufactured m12-3 trapezoidal thread nuts suitable for the gear are mounted on the screws.

Ölçüler: 36-47Ambalaj: 1 ÇiftAstar: Yıpranmaya dayanıklı nefes alabilir ter emici tekstil.Taban: PU-SRC S1 – S1PSaya: Süet Deri

Ölçüler: 36-47Ambalaj: 1 ÇiftAstar: Yıpranmaya dayanıklı nefes alabilir ter emici tekstil.Taban: PU-SRC S2 – S3Saya: Baskılı Deri

Pamuk astar üzerine nitril kaplı iş eldiveni. Örgü bilekliği ve özel kalıbı sayesinde eli daha iyi kavrar ve konforlu kullanım sağlar.

Ölçüler: 36-47Ambalaj: 1 ÇiftAstar: Yıpranmaya dayanıklı nefes alabilir ter emici tekstil.Taban: PU-SRC S1 – S1PSaya: Süet Deri